The Full Band Spectrum (FBS) circuit automatically transmits multiple frequencies simultaneously. The increased frequency range means that the signal received from the detector coil is analyzed from a wide range of responses. This allows the Explorer SE to analyze more target information so that the Target Identification (ID) is more accurate.
Ground balancing is automatic with Minelab's advanced digital filtering. Whatever field conditions you encounter, from dry clay to wet black sand or rich loam, Minelab will find what you're looking for.
Minelab's unique FBS technology means deep, sensitive, accurate detecting.
The new Classic series continues White's tradition of outstanding value and durability. With their all metal construction, the Classics are built to last and their reputation has proven that. Classics have always stood for superior performance in the field! Easy-to-use and rock solid discrimination make this Classic 5-ID a "Best Choice!" Easy-to-use because of its all automatic operation that gives you fully adjustable control over Sensitivity and Discrimination. Pinpointing is a snap with the new open center 950 Pro coil.
More than just a simple turn-on-and-go machine, the Classic 5-ID offers silent search discrimination that enables you to hear the faintest and deepest targets. The convenient handle mounted trigger switch for pinpointing makes for effortless digging of coins and jewelry. The All-Metal mode switch is as easy as locking the switch in the 2nd position and you're ready to dig ALL Targets! Controls are simple and straight forward in operation - making adjustments fast and easy!
The Classic 5-ID is one of the few automatic set ground balancing detectors that can be trimmer adjusted by the operator for even more precise ground balancing. With that feature alone, this Classic Series detectors will work in just about any soil. Discrimination is easy with a simple single turn control that offers at-a-glance controls. The best part is that the the Classic 5-ID will give you an 8 Zone Advance Target identification system so you will always know your target before you dig! No wasted time digging junk!
What makes the X-Terra 70 the “flagship” of the X-Terra series? It’s loaded with features, starting with two detection modes; “coin” or “relic.” It also provides you with two ground balancing modes “normal,” and “salt water beach.” The X-Terra 70 has “Adjustable Ground Balance” as well as “Noise Cancellation” and even more importantly – it accepts coils at three different frequencies! And that's just the tip of the iceberg!
The Minelab X-Terra 70 comes with a 9” “Slimline” searchcoil that is perfect for locating deep targets. This coil is made from a lightweight material that keeps you from becoming fatigued as you sweep the coil in search of treasure, and it is completely interchangeable with many other Minelab searchcoils.
All detectors from the X-Terra series feature an easy-to-read and intuitive LCD screen with quick access to key functions. The X-Terra 70 allows you to save your settings, and also displays a “Target Depth Indicator.” You can adjust settings such as “Tone ID,” “Graphic Pinpoint Function,” “All Metal Program,” and “Multi-Notch Accept/Reject.”
Minelab’s pinpointing couldn’t get any easier or any better. By enabling the pinpoint mode on your detector, you have told it to become a non-motion detector; temporarily disengaging discrimination patterns and emitting a signal for many more metals.
But where this series really shines is the new “VFLEX” technology. The X-Terra 70’s “VFLEX” technology uses state of the art digital and mixed-signal components to enhance standard, single frequency technology. This replaces most of the analogue circuitry with digital signal processing, and gives you dependable performance and improved immunity to environmental conditions such as ground mineralization, electromagnetic interference and temperature variations. This technology is updated every time you turn your detector on – the micro-controllers in the control box establish communication through a digital data link with the “Slimline” searchcoil to accurately calibrate your detector!
Among its many features, the MP3 is a digital machine that boasts both target identification and sensitivity control. Adjust the sensitivity control to the various ground conditions you search in, while discriminating out junk!
The bar graph on the LCD screen helps you locate your targets – fast! And the adjustable target identification system alerts you with unique tones for different targets as well as icons on the LCD screen – so you can both see and hear your treasure! It also includes an automatic low battery voltage indicator to keep you from being caught off guard with a dead detector.
Hear the sound of treasure via the built-in external speaker or headphones that snap right into the headphones jack. The compact design of the MP keeps it lightweight – it only weighs 2.45lbs.
The Fisher F2 features a large control panel with seven big push buttons and an equally big display. The control panel is very simple to operate, making this an excellent detector for beginners.
On the control housing you will see both a two (2) digit display and a target category readout on the top showing items from iron/foil to nickels, to dimes, quarters, etc. An arrow will illuminate under the target category and a two digit number will show specific target value that helps you identify your target. Anyone can pick up the Fisher F2 and start detecting right away.
The F2 features “Notch Discrimination” which allows you to pinpoint an item and prevent the detector from detecting it again (great for those pesky pull tabs!). It has an “All Metals” mode which is great for scanning parks, beaches and old home sites for coins and jewelry while still ignoring old scrap iron. Meanwhile the depth readout will tell you exactly how deep to dig for your target.
The sensitivity of this machine has earned rave reviews from both first time users and experienced detectorists. It has found items as deep as 10” in various soil types with medium sensitivity. Meanwhile the Pinpointing feature allows you to hone in on specific items. The 4” coil makes hunting in trash areas a breeze, and tested hot on 3 grain gold nuggets – meaning this machine is good for prospecting as well!
The light weight of the Fisher F2 combined with the adjustable arm cuff will keep you hunting for hours! Headphone jack is conveniently located on the bottom of the unit and is weather protected to stay safe in various hunting conditions.
The Titan 3000 offers the most advanced level of hunting from the Titan series of metal detectors. Like others in the Titan series, the large LCD screen will display a target identification and visual depth readout – but with more detail than most other detectors that cost much more!
Identify iron, nickels, gold rings, wheat cents, quarters and more with the 0 – 199 three digit target indication. Or use discrimination mode with depth reading, pinpointing, ITD mode and Notch discrimination to ensure optimum operation in all types of soil and give you outstanding results in each!
This detector is as simple as “A – B – C” to use! Scan the ground with your searchcoil, when the coil goes over a target the detector will give you: A. an Audio Target Identification sound. B. Arrows on the right side of the meter to indicate the probable target zone. And C. an estimated “Depth Scale” on the left side of the meter to tell you how far down to dig! Dig your target and continue to scan.
The Titan 2000 boasts more features than many other detectors that cost much more money. An advanced micro-processor allows this detector to utilize “notch discrimination,” “four-tone audio discrimination” and an “automatic ground balancing system” that will allow you to operate on all types of soil with outstanding results in each! It also features nine zone programmable visual target identification settings that enable you to find treasure as soon as you take this detector out of the box!
The large LCD screen will display a target identification and visual depth readout in 1” increments as far down as 8”. An instant target discrimination control, notch mode control, low battery warning, sensitivity level control, and power on and off buttons are only a touch away on the large, easy-to-read control box.
This detector is as simple as “A – B – C” to use! Scan the ground with your searchcoil, when the coil goes over a target the detector will give you: A. an Audio Target Identification sound. B. Arrows on the right side of the meter to indicate the probable target zone. And C. an estimated “Depth Scale” on the left side of the meter to tell you how far down to dig! Dig your target and continue to scan.
The three knobs on the MP5 allow you to adjust the sensitivity of the machine (to detect larger, deeper targets or focus on smaller ones buried closer to the surface), as well as the discrimination (to ignore junk and find only treasure) and volume adjustment (that coordinates with both the external speaker and/or headphones). These features combine to allow you to find coins that are lying just beneath the surface as well as those that are buried 10” to 3ft. down!
Arguably the best feature on the MP5 is its “Pinpoint” button – for you to zero in on the deeply buried treasures! The target alert light works with the pinpointer and, combined with the sensitivity and discrimination, you won’t be able to miss a thing!
Hear the sound of treasure via the built-in external speaker or headphones that snap right into the headphones jack. The compact design of the MP5 keeps it lightweight – it only weighs 2.62lbs, operating at a frequency of 12.5kHzs. It requires only two 9 volt batteries to function for many hours in the field, and comes with a five year limited warranty.
